Skip the manual navigation

Review an order's fraud analysis

Read an order's risk level, what drove it, and the recommended action, so you can decide whether to fulfil, investigate, or cancel.

14 min read · Updated October 4, 2026 · Screenshots use demonstration accounts

On this page
  1. 1. Read the risk badge
  2. 2. Read the recommendation
  3. 3. Check the indicators
  4. 4. Act on it
  5. 5. Re-run the analysis
  6. 6. Spot risky orders across your store
  7. 7. See the bigger picture
  8. Completion checklist
  9. Troubleshooting
Before you start

Open the order page — the Fraud analysis card appears for any order placed after fraud analysis was turned on for your store.

On a phone? Open the admin menu to find the same section. Screenshots below show the desktop view; tap “Open full size” for a closer look.
STEP 1

Read the risk badge

The Fraud analysis card shows a Low, Medium, or High risk badge with a short meter.

STEP 2

Read the recommendation

Accept, Investigate, or Cancel, based on the score.

STEP 3

Check the indicators

A list explains what raised or lowered the risk — for example a failed card security code (CVC) check, a mismatched IP country, a first order much larger than your store's average, a throwaway email domain, or Stripe Radar's own verdict. Each is flagged as a risk, a safe/positive fact, or informational. Positive facts (card checks passed, a returning customer, a matching IP country) are listed too, even though they don't add to the score.

STEP 4

Act on it

Fulfil normally for a low-risk order you're comfortable with, hold and investigate a medium-risk one, or cancel a high-risk one you don't want to ship.

STEP 5

Re-run the analysis

Click Run analysis again to re-check — useful after you've looked into it yourself, or if new information has come in. A medium/high result, or any change in level, is recorded on the order's timeline.

STEP 6

Spot risky orders across your store

On the orders list, High risk and Medium risk chips appear next to flagged orders, and you can filter the list by Fraud risk.

STEP 7

See the bigger picture

Analytics > Reports > Fraud analysis shows orders by risk level, their share of sales, and how many cancelled orders were cancelled for fraud.

CHECK YOUR WORK

You’re ready when…

  • Read the badge, the recommendation, and the indicator list before acting
  • Re-run the analysis after investigating, or after getting the Stripe webhook's own verdict
  • Filter the orders list by Fraud risk to find flagged orders quickly
  • Check Analytics > Reports > Fraud analysis for the store-wide picture

IF SOMETHING DOESN’T LOOK RIGHT

Troubleshooting

This order shows "hasn't been analysed".

It was placed before fraud analysis was turned on for your store, or wasn't paid by a method that's scored yet.

What makes a card payment score High automatically?

A Stripe Radar verdict of "highest" or "blocked" always forces High risk; a failed CVC check pushes the order to at least Medium on its own.

Can I see exactly why the IP-country flag fired?

The card shows the signal itself (for example "IP country doesn't match the shipping/billing country") but not the raw IP address. Cloudflare's own unknown-country codes are ignored so they never falsely trigger this flag.

No risk signals were found, but I still don't trust this order.

"No risk signals" only means nothing in Lulu's checks stood out — it's one signal among others, not a guarantee; use your own judgement alongside it.

In this section: Manage orders

Still need help?

Tell us your store address and what you’re trying to do. Leave out passwords and payment details.

Contact support