Set up registers, pair checkout devices, and connect hardware
Create a register for each counter, pair the tablets or browsers that will ring up sales, and connect receipt printers, scanners, and cash drawers.
On this page
Lulu POS must be installed first.
Add a register
Go to Point of Sale → Registers → Add register. Give it a name that matches its counter, e.g. "Front counter", and choose its Location — sales on this register draw stock from that location.
Pair a device
Go to Point of Sale → Devices → Pair new device. Enter a device name, optionally choose the register, and click Generate code. On the tablet or computer you want to use as a till, open the /pos/pair address shown in the dialog and enter the code. The code works once and expires after 15 minutes.
Mind the device cap
Lite allows 1 paired device, Retail 2, and Pro 4 (plus any extra-device add-ons on Retail or Pro). Pairing beyond the cap is blocked — upgrade the plan, add an extra checkout device, or revoke an unused device first.
Connect hardware
On Retail and Pro, open Point of Sale → Registers, click a register, and use the Hardware section to choose the printer connection (Browser print, USB, or Serial), paper width (58 or 80 mm), copies, and auto-cut, and to turn on a cash drawer (drawer pin and when it opens). Use Test print to check it. USB and serial printers work in Chrome or Edge on a computer or Android device; iPad uses browser printing. On Lite, receipts print through the browser. A barcode scanner that types like a keyboard works without any setup.
Set a fallback location
On Point of Sale → Settings → Location, the Default location is used only for registers that have no location of their own. Give each register its own location where you can.
Test the register
On the paired device, sign in with a staff PIN, open a drawer session with your opening cash, and ring up a small cash test sale.
CHECK YOUR WORK
You’re ready when…
IF SOMETHING DOESN’T LOOK RIGHT
Troubleshooting
The pairing code says it's already used or has expired.
A pairing code works once and expires after 15 minutes. On Point of Sale → Devices, click New code (or Re-pair for a revoked device) to get a fresh one.
A device shows Paused (over plan limit).
Your plan's device count dropped (a trial ended, you downgraded, or removed extra devices) and you have more paired devices than the cap. See "What happens when you go over your POS plan's limits".
The Hardware section is locked.
Register hardware settings are available on Retail and Pro. On Lite, print receipts from the browser.